how to reset the service indicator on my BMW 3 Series G20/G21 (2019-2024)?

BMW 3 Series G20/G21 (2019-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

342 words

Problem Statement

The service indicator on a BMW 3 Series G20/G21 (2019-2024) needs to be reset after completing scheduled maintenance or servicing.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary before performing the reset.

Symptoms

•Service indicator light remains illuminated on the dashboard
•Notifications for service due appear on the vehicle display
•Incorrect service interval reminders are displayed

Diagnostic Steps

1
Ensure the vehicle is in a stationary position with the ignition turned off.
2
Insert the key fob and press the start/stop button without pressing the brake pedal (to enter the accessory mode).
3
Navigate to the "My Vehicle" menu on the infotainment system.
4
Select "Vehicle Status" and then choose "Service Required."
5
Confirm the current service status and take note of the intervals shown.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None required for resetting the service indicator.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a stationary position with the ignition turned off.
2
Insert the key fob and press the start/stop button without pressing the brake pedal (to enter the accessory mode).
3
Navigate to the "My Vehicle" menu on the infotainment system.
4
Select "Vehicle Status" and then choose "Service Required."
5
Confirm the current service status and take note of the intervals shown.

Solution

Turn the ignition on by pressing the start/stop button without pressing the brake.
Wait for the dashboard lights to illuminate.

2. Reset the Service Indicator

Using the iDrive controller, navigate to “My Vehicle” on the main menu.
Select “Vehicle Status,” then “Service Required.”
Highlight the service item you wish to reset (e.g., Engine Oil, Brake Fluid, etc.).
Press and hold the iDrive controller to access the reset option.
Confirm the reset by selecting “Reset” when prompted.

3. Confirm Reset

Exit back to the main menu and return to the “Vehicle Status” to ensure the service indicator has been reset successfully.