FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 3 Series F30/F31 (2012-2019) won't stay running what should I do - BMW 3 Series
Home/Cars/BMW/3 Series/F30/F31 (2012-2019)/my BMW 3 Series F30/F31 (2012-2019) won't stay running what should I do

my BMW 3 Series F30/F31 (2012-2019) won't stay running what should I do

BMW 3 Series F30/F31 (2012-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
512 words

Problem Statement

The BMW 3 Series F30/F31 (2012-2019) is experiencing an issue where the engine won't stay running, indicating potential problems with fuel delivery, ignition, or engine management

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting the fuel system.

Symptoms

  • •Engine stalls shortly after starting
  • •Rough idle or fluctuations in engine RPM
  • •Check engine light illuminated
  • •Difficulty starting the engine
  • •Unusual sounds from the engine compartment
  • •Poor acceleration or loss of power

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Spark plug socket
  • •Multimeter
  • •Screwdrivers

Parts Required

  • •Fuel filter
  • •Spark plugs
  • •Ignition coils (if necessary)
  • •Vacuum hoses (if necessary)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working.
  • Ensure the vehicle is on a level surface and secure it with wheel chocks.
2. Fuel System Inspection
  1. Fuel Pump Check
    • Locate the fuel pump relay and verify its operation.
    • If necessary, replace the fuel pump if it is not functioning.
  2. Fuel Filter Replacement
    • Remove the old fuel filter using a socket set.
    • Install the new fuel filter, ensuring the flow direction is correct.
    • Reconnect all fuel lines securely.
3. Ignition System Maintenance
  1. Spark Plug Inspection
    • Remove spark plugs using a spark plug socket.
    • Inspect for wear, carbon buildup, or damage; replace if necessary.
  2. Ignition Coil Testing
    • Disconnect the ignition coils from the spark plugs.
    • Use a multimeter to test each coil for resistance; replace any faulty coils.
4. Vacuum Leak Repair
  • Inspect all vacuum hoses for cracks or disconnections.
  • Replace any damaged hoses and ensure a secure fit.
  • Recheck the intake manifold for proper sealing and tighten bolts as needed.