how to reset the TPMS light on my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

343 words

Problem Statement

The Tire Pressure Monitoring System (TPMS) light on a BMW 3 Series F30/F31 (2012-2019) is illuminated and requires resetting.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure tires are properly inflated to avoid driving hazards.

Symptoms

•TPMS warning light illuminated on the dashboard
•Possible inconsistent tire pressures
•Notification of low tire pressure in the vehicle's display
•Vehicle may display tire pressure information inaccurately

Diagnostic Steps

1
Check the tire pressures of all four tires to ensure they are at the manufacturer's recommended levels.
2
Inspect each tire for visible damage or punctures that may affect pressure.
3
Verify that the TPMS sensors are functioning properly using a TPMS scanner if available.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•N/A (Resetting does not require parts)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are inflated to the correct pressure as specified on the driver’s door jamb sticker.
Gather necessary tools: BMW key fob.

2. Reset the TPMS

Turn on the ignition: Insert the key fob into the ignition and turn it to the 'On' position without starting the engine.
Access the iDrive menu: Navigate to the main menu on the iDrive display.
Select 'Vehicle Information': Scroll down and select 'Vehicle Status'.
Choose 'Tyre Pressure Monitor': Select the option for 'Tyre Pressure Monitor'.
Reset the TPMS: Look for the option to reset the TPMS. Confirm the reset when prompted.
Start the engine: Turn the ignition to the 'Off' position and then start the engine to complete the reset process.

3. Verification

Check that the TPMS light is no longer illuminated after the reset.
Drive the vehicle for a short distance to ensure the system recalibrates.
Confirm that the tire pressure readings are accurate in the display.