how to reset the tire pressure monitoring system in my BMW 3 Series F30/F31 (2012-2019)?

BMW 3 Series F30/F31 (2012-2019)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

387 words

Problem Statement

The tire pressure monitoring system (TPMS) in your BMW 3 Series F30/F31 (2012-2019) requires a reset, often necessary after adjusting tire pressures or changing tires.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure that tires are inflated to the recommended pressures before resetting the TPMS.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message regarding tire pressure appears on the infotainment screen
•Tire pressure values not updating after adjustment

Diagnostic Steps

1
Ensure all tires are inflated to the manufacturer's recommended pressure.
2
Check the vehicle's owner manual for specific TPMS reset instructions.
3
Use the vehicle's onboard computer to navigate to the TPMS section.
4
Identify the reset button or option in the settings menu if applicable.
5
Verify that all sensors are functioning properly with no faults indicated.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset process

Parts Required

•None specifically required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure all tires are inflated to the manufacturer's recommended pressure.
2
Check the vehicle's owner manual for specific TPMS reset instructions.
3
Use the vehicle's onboard computer to navigate to the TPMS section.
4
Identify the reset button or option in the settings menu if applicable.
5
Verify that all sensors are functioning properly with no faults indicated.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Inflate all tires to the correct pressure as specified on the door jamb sticker.
Turn on the vehicle without starting the engine (accessory mode).

Use the iDrive controller to navigate to the "Vehicle Info" section on the infotainment display.
Select "Vehicle Status" and then choose "Tire Pressure Monitor."

3. Reset the TPMS

In the Tire Pressure Monitor menu, look for the option that says "Reset" or "Reset Tire Pressure."
Confirm the reset by selecting "Yes" when prompted.

4. Drive the Vehicle

Drive the vehicle at a speed of at least 20 mph for about 10 minutes.
This allows the TPMS system to recalibrate and register the new tire pressures.