how to reset the service light on my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

404 words

Problem Statement

The service light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after maintenance has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral if manual) before starting the reset process.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder displayed on the instrument cluster
•Potentially, the vehicle may indicate specific maintenance intervals or issues

Diagnostic Steps

1
Sit in the driver's seat and ensure the vehicle is turned off.
2
Insert the key fob into the ignition (or press the start button without pressing the brake pedal).
3
Press the gas pedal fully three times within 10 seconds.
4
Turn the ignition to the ON position without starting the engine.
5
Observe the dashboard for the service light reset option.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•No parts required for the reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Sit in the driver's seat and ensure the vehicle is turned off.
2
Insert the key fob into the ignition (or press the start button without pressing the brake pedal).
3
Press the gas pedal fully three times within 10 seconds.
4
Turn the ignition to the ON position without starting the engine.
5
Observe the dashboard for the service light reset option.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather the key fob for the vehicle.

Insert the key fob into the ignition or press the start button without the brake pedal.
Turn the ignition to the ON position (instrument cluster lights up) but do not start the engine.

3. Reset the Service Light

Press the gas pedal fully three times within 10 seconds.
Watch the dashboard display; the service light should flash and then turn off.
If necessary, navigate the onboard computer using the control knob to select the service item you wish to reset (e.g., engine oil, brake fluid).
Confirm the reset by pressing the corresponding button as prompted on the screen.

4. Finalize

Turn the ignition off.
Remove the key fob from the ignition or switch off the engine.
Wait a few seconds and restart the vehicle to ensure the service light is off.