how to reset the service light on my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

3 min read

436 words

Problem Statement

The service light on a BMW 3 Series F30/F31 (2012-2019) is illuminated and needs to be reset following maintenance or service.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before attempting to reset the service light.

Symptoms

•Service light is illuminated on the dashboard
•Vehicle may display a service reminder message
•No other performance issues or warning lights present

Diagnostic Steps

1
Ensure the vehicle is in a stationary position with the ignition turned off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to turn on the ignition (position 2).
3
Wait for all warning lights to illuminate on the dashboard and then turn off the ignition again.
4
Press and hold the trip reset button located on the instrument cluster.
5
While holding the trip reset button, turn the ignition back to position 2.
6
Continue to hold the trip reset button until the service light resets and the display shows the new service interval.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No tools are necessary for this procedure.

Parts Required

•No parts are required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a stationary position with the ignition turned off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to turn on the ignition (position 2).
3
Wait for all warning lights to illuminate on the dashboard and then turn off the ignition again.
4
Press and hold the trip reset button located on the instrument cluster.
5
While holding the trip reset button, turn the ignition back to position 2.
6
Continue to hold the trip reset button until the service light resets and the display shows the new service interval.

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked on a level surface and the engine is off.

2. Accessing the Ignition

Insert the key fob into the ignition or press the start button without pressing the brake pedal to activate the ignition (position 2).
Wait for the dashboard lights to illuminate.

3. Resetting the Service Light

Locate the trip reset button on the instrument cluster.
Press and hold the trip reset button.
While holding the button, turn the ignition back to position 2.
Continue holding the trip reset button until the service light resets. You should see a confirmation message or the service interval displayed on the screen.

4. Finalizing

Release the trip reset button once the service light has been reset.
Turn off the ignition and remove the key fob (if applicable).