how to reset the oil service light on my BMW 3 Series F30/F31 (2012-2019)?

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

401 words

Problem Statement

The oil service light on a BMW 3 Series F30/F31 (2012-2019) requires resetting after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" mode and on a flat surface before performing the reset.

Symptoms

•Oil service light illuminated on the dashboard
•Maintenance reminder notification displayed
•Engine oil change has been performed

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition slot (do not start the engine).
3
Press the start/stop button without pressing the brake pedal to activate the ignition.
4
Navigate to the "On-Board Computer" menu using the iDrive controller.
5
Select "Vehicle Info" then "Vehicle Status."
6
Choose "Service Required" and check the oil service status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset procedure, just the key fob.

Parts Required

•No parts are needed for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition slot (do not start the engine).
3
Press the start/stop button without pressing the brake pedal to activate the ignition.
4
Navigate to the "On-Board Computer" menu using the iDrive controller.
5
Select "Vehicle Info" then "Vehicle Status."
6
Choose "Service Required" and check the oil service status.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather the BMW key fob for access to the ignition.

Insert the key fob and press the start/stop button to turn on the ignition without starting the engine.
Use the iDrive controller to access the main menu on the display screen.

3. Navigate to the Oil Service Reset

Select "Vehicle Info" from the menu.
Choose "Vehicle Status" to view the current service information.
Proceed to "Service Required."

4. Reset the Oil Service Light

Highlight the "Engine Oil" option.
Press and hold the iDrive controller for a few seconds until the reset option appears.
Confirm the reset when prompted by selecting "Reset."

5. Finalize and Verify

Exit the menu and turn off the ignition.
Start the vehicle to ensure the oil service light is no longer illuminated.