how to reset the oil service light on BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

432 words

Problem Statement

The oil service light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change to ensure accurate maintenance interval alerts.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" or "Neutral" with the parking brake engaged before performing this procedure.

Symptoms

•Oil service light illuminated on the dashboard
•Dashboard display showing service due message
•Engine oil change completed but warning remains active

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or have it in the vehicle if it has a Start/Stop button.
3
Press the start button without pressing the brake pedal to turn on the ignition (or turn the key to the "on" position).
4
Check that the odometer display is visible on the instrument cluster.
5
Locate the trip reset button on the instrument cluster.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this reset, but a key fob or ignition key is necessary.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or have it in the vehicle if it has a Start/Stop button.
3
Press the start button without pressing the brake pedal to turn on the ignition (or turn the key to the "on" position).
4
Check that the odometer display is visible on the instrument cluster.
5
Locate the trip reset button on the instrument cluster.

Solution

Turn on the Ignition:
- Press the start button or turn the key to the "on" position without starting the engine.
Navigate to the Odometer:
- Ensure the odometer display shows instead of the trip meter. If necessary, press the trip reset button until the odometer is displayed.

2. Resetting the Oil Service Light

Press and Hold the Trip Reset Button:
- With the odometer displayed, press and hold the trip reset button.
Turn on the Ignition Again:
- While holding the trip reset button, turn the ignition on (do not start the engine).
Wait for the Reset Process:
- Continue holding the button until the service light begins to flash and then goes off, usually taking around 10 seconds.
Release the Trip Reset Button:
- Once the light has reset, release the trip reset button.
Check Confirmation:
- The oil service light should now be reset, and the service indicator should show the next service interval.