how to reset the oil service light in BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

387 words

Problem Statement

The oil service light needs to be reset in a BMW 3 Series F30/F31 (2012-2019) after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and on a flat surface while performing the reset.

Symptoms

•Oil service light is illuminated on the dashboard
•Message indicating "Service Engine Soon" or similar warning
•No oil change reminder notification after maintenance

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position and the key fob is outside the vehicle.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal (for push-start models).
3
Access the vehicle's instrument cluster.
4
Check for any additional service reminders that may need addressing before resetting the oil service light.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position and the key fob is outside the vehicle.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal (for push-start models).
3
Access the vehicle's instrument cluster.
4
Check for any additional service reminders that may need addressing before resetting the oil service light.

Solution

1. Preparation

Gather necessary tools:
- BMW key fob
Ensure the vehicle is parked on a flat surface.

Turn on the Ignition: Insert the key fob into the ignition or press the start button (without starting the engine).
Navigate to the Service Menu:
- Press the "Start/Stop" button to turn on the electrical systems without starting the engine.
- Use the "iDrive" controller to navigate to "Vehicle Information" on the screen.
- Select "Vehicle Status" and then choose "Service Required".

3. Reset the Oil Service Light

Find the Oil Service Reminder: In the service menu, locate the "Engine Oil" option.
Reset: Highlight the "Reset" option and confirm by pressing the iDrive controller's button. Follow any prompts that appear on the screen to confirm the reset.

4. Turn Off the Ignition

After the reset is confirmed, turn off the ignition and remove the key fob.