how to reset the oil change light on BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

384 words

Problem Statement

The oil change light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change to ensure accurate maintenance tracking.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface with the ignition off before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Notification for oil service due displayed in the instrument cluster
•Incorrect oil service interval tracking

Diagnostic Steps

1
Ensure the vehicle is in a safe and stationary position, with the engine turned off.
2
Insert the key fob into the ignition slot or ensure the vehicle is in "On" mode without starting the engine.
3
Access the instrument cluster by navigating through the iDrive system or using the odometer reset button.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a safe and stationary position, with the engine turned off.
2
Insert the key fob into the ignition slot or ensure the vehicle is in "On" mode without starting the engine.
3
Access the instrument cluster by navigating through the iDrive system or using the odometer reset button.

Solution

1. Preparation

Ensure the vehicle is in "On" mode (do not start the engine).
Have the key fob ready for the ignition.

Press the start button without pressing the brake pedal to access the ignition in "On" mode.
Immediately press and hold the trip odometer reset button located on the instrument cluster until the display shows the service menu.

3. Reset the Oil Change Light

Use the trip odometer reset button to scroll through the menu options until you find the "Oil Service" option.
Once highlighted, press and hold the trip odometer reset button again until the confirmation message appears.
Confirm the reset by selecting "Yes" when prompted.

4. Verify the Reset

After confirming, the display should show the oil change light extinguished.
Turn off the ignition and then restart the vehicle to ensure the oil change light remains off.