how to reset the oil change light on BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

375 words

Problem Statement

The oil change light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change to ensure accurate maintenance tracking.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position to avoid unintended movement.

Symptoms

•Oil change light is illuminated on the dashboard
•Maintenance reminder message displayed on the instrument cluster
•Engine oil has been changed recently

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and is in park or neutral with the engine off.
2
Insert the key fob into the ignition (or press the start button without pressing the brake pedal).
3
Access the vehicle's instrument cluster and note the current oil change light status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: key fob, and ensure the vehicle is in a safe, stationary position.
Ensure the engine is off.

2. Turn on Ignition

Insert the key fob into the ignition or press the start button to turn on the electrical systems without starting the engine.
Wait for the dashboard lights to illuminate.

Press the gas pedal fully three times within 10 seconds.
After the third press, the oil service light will change to indicate that the reset menu is accessible.

4. Reset the Oil Change Light

Use the buttons on the steering wheel or the iDrive controller to navigate to the “Service” or “Oil Service” option in the display.
Select the option to reset the oil change light.
Confirm the reset when prompted.

5. Turn Off Ignition

Turn off the ignition by removing the key fob or pressing the start button again.