how to reset the oil change light in my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

377 words

Problem Statement

The oil change light on a BMW 3 Series F30/F31 (2012-2019) is illuminated and needs to be reset after performing an oil change.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmission) with the parking brake engaged before starting the reset process.

Symptoms

•Oil change light remains on after oil change
•Dashboard warning indicating service is due
•Engine oil level is normal, but the warning persists

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or press the start/stop button without pressing the brake pedal to turn on the electrical systems.
3
Navigate to the vehicle's onboard computer system using the iDrive controller.
4
Go to "Vehicle Info" or "Settings" and select "Oil Change and Service" to access the service menu.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or press the start/stop button without pressing the brake pedal to turn on the electrical systems.
3
Navigate to the vehicle's onboard computer system using the iDrive controller.
4
Go to "Vehicle Info" or "Settings" and select "Oil Change and Service" to access the service menu.

Solution

1. Preparation

Ensure the vehicle is in a stationary position with the ignition on.
Have the key fob ready to access the onboard computer.

Use the iDrive controller to navigate to "Vehicle Info."
Select "Vehicle Status" and then navigate to "Service Requirements."

3. Reset the Oil Change Light

Find the option labeled "Engine Oil" or "Oil Change."
Select "Reset" or "Reset Service Interval."
Confirm the reset when prompted to ensure the oil change light is turned off.

4. Verify Reset

After completing the reset, turn off the ignition.
Restart the vehicle to confirm that the oil change light is no longer illuminated.