how to reset the maintenance light on my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

364 words

Problem Statement

The maintenance light on a BMW 3 Series F30/F31 (2012-2019) is illuminated and needs to be reset after servicing.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the instrument cluster
•Vehicle may not indicate maintenance due when the light is reset

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position and all doors are closed.
2
Insert the key fob or press the start button without pressing the brake pedal to access the "On" position.
3
Navigate to the "Trip" or "Check Control" menu on the instrument cluster using the odometer reset button.
4
Check for any additional warnings or messages that may affect the reset process.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (optional for further diagnosis)

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position and all doors are closed.
2
Insert the key fob or press the start button without pressing the brake pedal to access the "On" position.
3
Navigate to the "Trip" or "Check Control" menu on the instrument cluster using the odometer reset button.
4
Check for any additional warnings or messages that may affect the reset process.

Solution

1. Preparation

Confirm that the vehicle has received the necessary maintenance.
Ensure the vehicle is parked safely with the engine off.

Turn the ignition to the "On" position without starting the engine.
Within 5 seconds, press the gas pedal fully three times to initiate the reset mode.

3. Reset the Maintenance Light

Look for the "Reset" option on the dashboard display.
Press and hold the odometer reset button until the maintenance light starts flashing.
Release the button, and then press it again to confirm the reset.

4. Verify the Reset

Turn off the ignition.
Turn the ignition back to the "On" position and check that the maintenance light is no longer illuminated.