how to reset BMW 3 Series F30/F31 (2012-2019) service light after oil change

BMW 3 Series F30/F31 (2012-2019)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

367 words

Problem Statement

The service light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change to reflect the new service interval.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Oil change reminder displayed
•Maintenance indicator showing "Oil Service" or "Inspection"

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start button once without pressing the brake pedal to turn on the electrical systems.
4
Locate the trip odometer reset button on the dashboard.
5
Press and hold the trip odometer reset button.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset procedure

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start button once without pressing the brake pedal to turn on the electrical systems.
4
Locate the trip odometer reset button on the dashboard.
5
Press and hold the trip odometer reset button.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the key fob ready.

2. Turn on Ignition

Insert the key fob into the ignition slot.
Press the start button without pressing the brake pedal to activate the electrical systems.

3. Reset the Service Light

Press and hold the trip odometer reset button on the instrument cluster.
While holding the reset button, turn the ignition on (press the start button again).
Continue to hold the reset button until the service light starts to blink and then goes off.
Release the trip odometer reset button after the light has turned off.

4. Confirm Reset

Turn off the ignition completely.
Restart the vehicle to confirm that the service light is no longer illuminated.