how do I reset the oil change light on my BMW 3 Series F30/F31 (2012-2019)?

BMW 3 Series F30/F31 (2012-2019)

Error Codes

5 minutes

Time

medium

Difficulty

medium

Severity

3 min read

410 words

Problem Statement

The oil change light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change service.

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a stable surface before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Service reminder notification active
•No other engine or maintenance warning lights present
•Engine performance unaffected

Diagnostic Steps

1
Ensure the vehicle is in park (P) and the ignition is turned off.
2
Insert the key fob and press the start button without pressing the brake pedal to turn on the ignition (accessory mode).
3
Wait for the dashboard to light up and display the current mileage.
4
Press and hold the gas pedal fully down.
5
While holding the gas pedal, press the start button again to turn on the ignition.
6
Continue holding the gas pedal until the oil change light resets.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset procedure.

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park (P) and the ignition is turned off.
2
Insert the key fob and press the start button without pressing the brake pedal to turn on the ignition (accessory mode).
3
Wait for the dashboard to light up and display the current mileage.
4
Press and hold the gas pedal fully down.
5
While holding the gas pedal, press the start button again to turn on the ignition.
6
Continue holding the gas pedal until the oil change light resets.

Solution

1. Preparation

Gather necessary tools (if needed): None required.
Ensure the vehicle is parked on a flat surface and in a safe location.

2. Access Ignition

Insert the key fob into the ignition slot (if applicable) or have it in the vehicle.
Press the start button without pressing the brake pedal to activate accessory mode.

3. Reset Oil Change Light

Wait for the dashboard indicators to illuminate.
Fully depress the gas pedal and keep it pressed.
While holding the gas pedal, press the start button once more to turn on the ignition.
Hold the gas pedal down until the oil change light flashes and then disappears, indicating a successful reset.

4. Confirm Reset

Release the gas pedal after the oil change light goes off.
Turn off the ignition and then start the engine to verify that the oil change light does not reappear.