FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 3 Series E90/E91 (2005-2012) has sudden loss of acceleration while driving - BMW 3 Series
Home/Cars/BMW/3 Series/E90/E91 (2005-2012)/my BMW 3 Series E90/E91 (2005-2012) has sudden loss of acceleration while driving

my BMW 3 Series E90/E91 (2005-2012) has sudden loss of acceleration while driving

BMW 3 Series E90/E91 (2005-2012)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
528 words

Problem Statement

The BMW 3 Series E90/E91 (2005-2012) is experiencing a sudden loss of acceleration while driving, which could indicate issues with the engine, transmission, or fuel system.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling during acceleration
  • •Unresponsive throttle pedal
  • •Rough idling or misfiring
  • •Poor fuel economy
  • •Increased engine noise

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Screwdriver set

Parts Required

  • •Throttle position sensor (if faulty)
  • •Spark plugs
  • •Ignition coils (if needed)
  • •Fuel filter (if applicable)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Inspect and Replace Throttle Position Sensor (if faulty)
  • Sub-steps:
    1. Locate the throttle position sensor on the throttle body.
    2. Disconnect the wiring harness from the sensor.
    3. Remove the mounting screws holding the sensor in place using a socket set.
    4. Install the new throttle position sensor and torque the screws to the manufacturer's specification (typically around 8-10 Nm).
    5. Reconnect the wiring harness.
3. Inspect and Replace Spark Plugs and Ignition Coils (if necessary)
  • Sub-steps:
    1. Remove the engine cover to access the ignition coils.
    2. Disconnect the electrical connectors from each ignition coil.
    3. Remove the ignition coils using a socket set.
    4. Inspect the spark plugs; if worn or fouled, replace them with OEM parts.
    5. Install new ignition coils, ensuring they are seated properly, and reconnect the electrical connectors.
4. Check and Repair Fuel System
  • Sub-steps:
    1. Visually inspect fuel lines for leaks or damage.
    2. If a fuel pressure test is required, use a fuel pressure gauge to check the pressure at the fuel rail (should be around 50-60 psi).
    3. If low pressure is detected, replace the fuel pump or filter as necessary.
    4. Reconnect any lines and components removed during inspection.