how to reset the oil service light on my BMW 3 Series E90/E91 (2005-2012)

BMW 3 Series E90/E91 (2005-2012)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

351 words

Problem Statement

The oil service light on a BMW 3 Series E90/E91 (2005-2012) needs to be reset after an oil change to ensure accurate maintenance tracking.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position when performing the reset.

Symptoms

•Oil service light illuminated on the dashboard
•Notification of upcoming service due
•Inaccurate service interval displayed

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the ignition is in the OFF position.
2
Insert the key into the ignition but do not start the engine.
3
Press the gas pedal fully to the floor three times within five seconds.
4
Turn the ignition key to the ON position without starting the engine.
5
Observe the dashboard for the oil service light status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob for ignition

Parts Required

•None required for the reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the ignition is in the OFF position.
2
Insert the key into the ignition but do not start the engine.
3
Press the gas pedal fully to the floor three times within five seconds.
4
Turn the ignition key to the ON position without starting the engine.
5
Observe the dashboard for the oil service light status.

Solution

1. Preparation

Gather necessary tools:
- Key fob for the vehicle.
Ensure the vehicle is in the OFF position.

2. Access the Ignition

Insert the key into the ignition.
Do not start the engine; simply turn the key to the ON position (the position just before starting).

3. Resetting the Oil Service Light

Press the gas pedal fully to the floor three times within five seconds.
Turn the ignition to the OFF position.
Turn the ignition back to the ON position and check if the oil service light has turned off.

4. Final Check

If the oil service light remains on, repeat the procedure to ensure it was executed correctly.