how to reset the oil light on Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

406 words

Problem Statement

Learn how to reset the oil light on your Volvo XC90 Second Generation (2015-2024) after an oil change. Step-by-step guide for a quick reset.

Affected Component

Engine

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and not in motion during the reset process.

Symptoms

•Oil light remains illuminated on the dashboard
•Recent oil change performed
•Engine oil level is adequate
•No unusual engine noises or performance issues

Diagnostic Steps

1
Confirm that the oil change has been performed and that the correct oil type is used.
2
Ensure the engine oil level is within the recommended range using the dipstick.
3
Check for any fault codes using an OBD-II scanner to rule out underlying issues.
4
Verify that the ignition is in the 'ON' position without starting the engine.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key or fob
•OBD-II scanner (optional)

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Confirm that the oil change has been performed and that the correct oil type is used.
2
Ensure the engine oil level is within the recommended range using the dipstick.
3
Check for any fault codes using an OBD-II scanner to rule out underlying issues.
4
Verify that the ignition is in the 'ON' position without starting the engine.

Solution

1. Preparation

Gather necessary tools:
- Ignition key or fob
- OBD-II scanner (optional for verification purposes)

Insert the key fob into the ignition slot or have the key ready for push-button start.
Turn the ignition to the "ON" position without starting the engine.
Wait for the dashboard lights to illuminate and then press the "Start/Stop" button quickly (if using push-button start) or turn the key to the "ON" position.

3. Resetting the Oil Light

Using the scroll wheel on the steering wheel, navigate to the "My Car" menu on the dashboard display.
Select "Maintenance" from the options.
Choose "Oil" or "Oil Change" from the maintenance options.
Select "Reset" or "Reset Oil Change Interval" and confirm the reset when prompted.

4. Verification

Turn off the ignition and then turn it back on to check if the oil light is no longer illuminated.
Check for any error messages related to oil change in the dashboard display.