how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024)?

Volvo XC90 Second Generation (2015-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

368 words

Problem Statement

Learn how to reset the oil change light on your 2015-2024 Volvo XC90. Step-by-step guide to ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position, parked on a flat surface, and the engine is off before starting the reset process.

Symptoms

•Oil change light illuminated on the dashboard
•Service reminder notification displayed
•No other performance issues expected

Diagnostic Steps

1
Ensure the vehicle is in the OFF position and the key is removed from the ignition.
2
Sit in the driver’s seat and close all doors.
3
Insert the key into the ignition or press the start button without starting the engine to activate the dashboard.
4
Navigate to the trip computer using the right-hand steering wheel buttons.
5
Locate the 'Oil Change' light or 'Service' menu on the display.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the OFF position and the key is removed from the ignition.
2
Sit in the driver’s seat and close all doors.
3
Insert the key into the ignition or press the start button without starting the engine to activate the dashboard.
4
Navigate to the trip computer using the right-hand steering wheel buttons.
5
Locate the 'Oil Change' light or 'Service' menu on the display.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.

Turn on the ignition (do not start the engine).
Press and hold the "OK" button on the steering wheel until the display shows the service menu.
Use the right arrow button on the steering wheel to navigate to the "Oil Change" option.

3. Reset the Oil Change Light

Once the "Oil Change" option is highlighted, press and hold the "OK" button for a few seconds.
A confirmation message will appear on the display. Select “Yes” to confirm the reset.

4. Final Check

Turn off the ignition.
Restart the vehicle to ensure the oil change light is no longer illuminated.