FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024) - Volvo XC90
Home/Cars/Volvo/XC90/Second Generation (2015-2024)/how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024)

how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
326 words

Problem Statement

Learn how to reset the oil change light on your Volvo XC90 Second Generation (2015-2024) with this simple step-by-step guide.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and on a flat surface before performing the reset.

Symptoms

  • •Oil change light remains illuminated on the dashboard
  • •No other warning lights present
  • •Engine performance is normal

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a level surface and the engine is off.
2. Ignition Cycle
  1. Turn Ignition On: Insert the ignition key and turn it to the "On" position without starting the engine.
  2. Press Gas Pedal: Quickly press the gas pedal three times within five seconds. This sequence should be done without any delays between presses.
  3. Turn Ignition Off: After pressing the gas pedal, turn the ignition back to the "Off" position.
3. Verify Reset
  1. Turn Ignition On Again: Turn the ignition back to the "On" position to check if the oil change light is still illuminated.
  2. Start Engine: Start the engine and observe the dashboard for any warning lights.