how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

320 words

Problem Statement

Learn how to reset the oil change light on your Volvo XC90 Second Generation (2015-2024) with this easy step-by-step guide.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the engine is off during this process.

Symptoms

•Oil change warning light remains illuminated on the dashboard
•Possible notifications about maintenance due in the vehicle's display
•No other engine or system warning lights are present

Diagnostic Steps

1
Sit in the driver's seat and close all doors.
2
Insert the key fob into the ignition without starting the engine (turn the key to the 'On' position).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition off and then back on to check if the reset was successful.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the engine off.
Gather necessary tools such as the vehicle's key fob.

2. Access the Ignition

Insert the key fob into the ignition slot.
Turn the ignition to the "On" position without starting the engine.

3. Reset the Oil Change Light

Quickly press the gas pedal down three times fully within five seconds.
Turn the ignition off and remove the key fob.

4. Verify the Reset

Turn the ignition back to the "On" position to confirm the oil change light is no longer illuminated.