FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the service light on my Volvo XC90 First Generation (2002-2014) - Volvo XC90
Home/Cars/Volvo/XC90/First Generation (2002-2014)/how do I reset the service light on my Volvo XC90 First Generation (2002-2014)

how do I reset the service light on my Volvo XC90 First Generation (2002-2014)

Volvo XC90 First Generation (2002-2014)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
308 words

Problem Statement

Learn how to reset the service light on your Volvo XC90 First Generation (2002-2014) with this simple step-by-step guide.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing this reset.

Symptoms

  • •Service light illuminated on the dashboard
  • •Potential display of a maintenance message
  • •No engine performance issues related to the reset process

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this process.
  • Ensure the vehicle is parked safely with the engine off.
2. Resetting the Service Light
  1. Insert the key into the ignition and turn it to the "On" position.
  2. While keeping the ignition in the "On" position, press and hold the odometer reset button.
  3. Continue to hold the button until the service light begins to flash and then extinguishes. This usually takes about 10 seconds.
  4. Release the odometer reset button once the light goes off.
  5. Turn the key back to the "Off" position and then start the engine to verify that the service light is no longer illuminated.