FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Volvo XC60 Second Generation (2018-2024) check engine light keep coming on - Volvo XC60
Home/Cars/Volvo/XC60/Second Generation (2018-2024)/why does my Volvo XC60 Second Generation (2018-2024) check engine light keep coming on

why does my Volvo XC60 Second Generation (2018-2024) check engine light keep coming on

Volvo XC60 Second Generation (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
484 words

Problem Statement

Learn how to diagnose and fix the check engine light issue on your 2018-2024 Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before opening any components related to the cooling system or engine.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine hesitation
  • •Loss of power during acceleration
  • •Poor fuel economy
  • •Increased emissions
  • •Engine stalling intermittently

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Screwdrivers
  • •Pliers

Parts Required

  • •Spark plugs
  • •Ignition coils
  • •Fuel filter
  • •Gas cap
  • •Air filter

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.
  • Ensure the vehicle is on a level surface and secure with wheel chocks.
2. Address Error Codes
  • Sub-step 1: Refer to the OBD-II scanner results to identify the specific error codes.
  • Sub-step 2: Research each code to determine the affected system and potential repairs needed.
3. Replace Faulty Components
  • Sub-step 1: If codes indicate ignition issues, remove the engine cover and replace worn spark plugs or ignition coils.
  • Sub-step 2: If a fuel pressure issue is indicated, replace the fuel filter and inspect the fuel pump.
4. Inspect and Repair the Gas Cap
  • Sub-step 1: Remove and inspect the gas cap for any signs of cracks or wear.
  • Sub-step 2: If faulty, replace it with a new gas cap, ensuring a tight fit to prevent fuel vapor leaks.
5. Check and Repair Air Intake System
  • Sub-step 1: Remove the air intake duct and inspect for cracks or loose fittings.
  • Sub-step 2: Clean or replace the air filter if it is clogged or dirty.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Screwdrivers
  • Pliers

Parts Required:

  • Spark plugs
  • Ignition coils
  • Fuel filter
  • Gas cap
  • Air filter

Estimated Repair Time: 2-4 hours

Safety Warnings:

  • Disconnect the battery before working on electrical components.
  • Allow the engine to cool before opening any components related to the cooling system or engine.