what to do if my Volvo XC60 Second Generation (2018-2024) is shaking while braking

Volvo XC60 Second Generation (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

457 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Volvo XC60 (2018-2024). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the brakes to cool before handling components after driving.

Symptoms

•Shaking or vibration felt through the steering wheel when braking
•Pulsating brake pedal during braking
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Noise from brakes (squeaking or grinding)

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping or scoring.
3
Examine suspension components (tie rods, control arms) for wear or damage.
4
Verify wheel alignment and balance.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Dial indicator

Parts Required

•Brake pads
•Brake rotors (if warped or damaged)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Safely lift the vehicle using a jack and secure it with jack stands.
Remove the wheel to access the brake components.

2. Inspect Brake Components

Brake Pads:
- Remove the caliper bolts using a socket wrench.
- Carefully slide the caliper off the rotor and suspend it using a wire or bungee cord (do not let it hang by the brake line).
- Inspect the pads for uneven wear or damage and replace if necessary.
Brake Rotors:
- Check the rotor surface for warping or scoring using a dial indicator.
- If warped, replace the rotors. If they are within specifications, consider resurfacing.

3. Examine Suspension Components

Inspect tie rods, control arms, and bushings for any signs of wear or damage.
Replace any worn components as necessary to ensure proper alignment and stability.

4. Reassemble and Adjust

Reinstall the brake caliper over the new or resurfaced rotor and tighten caliper bolts to the manufacturer’s torque specifications (typically around 25-30 Nm).
Reattach the wheel and lower the vehicle back to the ground.