what does the "oil change required" light mean in my Volvo XC60 Second Generation (2018-2024)?

Volvo XC60 Second Generation (2018-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

553 words

Problem Statement

Learn about the "oil change required" light in your Volvo XC60 (2018-2024) and how to perform an oil change. Step-by-step guide included.

Affected Component

Engine

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow engine to cool before opening the oil filler cap or draining oil.

Symptoms

•"Oil change required" light illuminated on the dashboard
•Engine noise or knocking sounds
•Decreased engine performance
•Engine overheating
•Unusual engine vibrations

Diagnostic Steps

1
Check the oil level using the dipstick to ensure it is within the recommended range.
2
Inspect the oil condition for dark color or gritty texture, indicating it needs replacement.
3
Verify the service history to confirm if the oil change interval has been reached according to the manufacturer’s recommendations.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Oil filter wrench
•Funnel
•Oil catch pan
•Torque wrench
•Jack and jack stands

Parts Required

•New engine oil
•New oil filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the oil level using the dipstick to ensure it is within the recommended range.
2
Inspect the oil condition for dark color or gritty texture, indicating it needs replacement.
3
Verify the service history to confirm if the oil change interval has been reached according to the manufacturer’s recommendations.

Solution

1. Preparation

Gather all tools and parts required for the oil change.
Ensure the vehicle is parked on a level surface and turn off the engine.
Allow the engine to cool down to avoid burns.

2. Gather Tools and Parts

Tools Required:
- Socket set
- Oil filter wrench
- Funnel
- Oil catch pan
- Torque wrench
- Jack and jack stands (if necessary)
Parts Required:
- New engine oil (check owner's manual for specifications)
- New oil filter

3. Drain Old Oil

Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands if needed.
2. Place the oil catch pan under the oil pan.
3. Remove the oil drain plug using the socket set and allow old oil to drain completely.
4. Replace the drain plug and tighten it to the manufacturer’s torque specifications.

4. Replace Oil Filter

Sub-steps:
1. Use the oil filter wrench to remove the old oil filter.
2. Apply a small amount of new oil to the rubber gasket of the new oil filter.
3. Install the new oil filter and tighten it according to the manufacturer's specifications.

5. Add New Oil

Sub-steps:
1. Remove the oil filler cap on top of the engine.
2. Using a funnel, pour the new engine oil into the engine.
3. Replace the oil filler cap securely.

6. Reset Oil Change Light

Sub-steps:
1. Turn the ignition to the ON position without starting the engine.
2. Use the vehicle's menu to navigate to the oil change reset option.
3. Follow the prompts to reset the oil change required light.