my Volvo XC60 Second Generation (2018-2024) shakes when I brake, what should I check

Volvo XC60 Second Generation (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

466 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Volvo XC60 (2018-2024). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow brakes to cool before inspection or repair.

Symptoms

•Vehicle shakes or vibrates during braking
•Pulsation felt in the brake pedal
•Uneven wear on brake pads or rotors
•Possible noise during braking (squeaking or grinding)
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pad thickness and condition.
3
Examine brake calipers for proper operation and sticking.
4
Assess wheel bearings for play or damage.
5
Inspect suspension components for wear or damage.
6
Check tire balance and alignment.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Bungee cord

Parts Required

•New brake rotors
•New brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts for the repair.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Wear safety glasses and gloves for protection.

2. Lift the Vehicle

Use a hydraulic jack to lift the front or rear of the vehicle as needed.
Secure with jack stands to ensure safety before working on the vehicle.

3. Inspect and Replace Brake Rotors

Tools Required: Socket set, torque wrench, brake cleaner.
Remove the wheel to access the brake assembly.
Unbolt the brake caliper and hang it using a bungee cord (do not let it hang by the brake line).
Remove the brake rotor.
Inspect for warping using a straightedge; if warped, replace with new rotors.
Clean the new rotor with brake cleaner before installation.
Reinstall the rotor, ensuring it is seated properly.

4. Replace Brake Pads

Remove the old brake pads from the caliper bracket.
Check the caliper slides for lubrication; reapply brake grease if needed.
Install new brake pads in the caliper bracket.
Reattach the caliper over the new pads and torque the bolts to the manufacturer's specifications.

5. Reassemble and Lower Vehicle

Reinstall the wheel and torque lug nuts to the manufacturer's specifications.
Lower the vehicle back to the ground and remove jack stands.