how to reset the tire pressure light on my Volvo XC60

Volvo XC60 Second Generation (2018-2024)

0.5 hours

Time

easy

Difficulty

medium

Severity

3 min read

422 words

Problem Statement

Learn how to reset the tire pressure light on your Volvo XC60. Step-by-step instructions for diagnosing and fixing TPMS issues.

Affected Component

Electrical

Estimated Time

0.5 hours

Important safety information - read before proceeding

•Ensure the vehicle is on a stable surface and the parking brake is engaged while checking tire pressures.

1
Check all tire pressures using a reliable tire pressure gauge to ensure they are at manufacturer-recommended levels.
2
Inspect tires visually for any punctures, damage, or signs of air loss.
3
Verify if the spare tire is included in the TPMS system and check its pressure if applicable.
4
Confirm that the tire pressure monitoring system is functioning correctly by using a diagnostic tool if needed.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge to ensure they are at manufacturer-recommended levels.
2
Inspect tires visually for any punctures, damage, or signs of air loss.
3
Verify if the spare tire is included in the TPMS system and check its pressure if applicable.
4
Confirm that the tire pressure monitoring system is functioning correctly by using a diagnostic tool if needed.

Solution

1. Preparation

Ensure all tires are inflated to the correct pressure as per the vehicle’s specifications (usually found on the driver’s side door jamb).
Gather necessary tools, including a tire pressure gauge and possibly an OBD-II scanner.

2. Reset the TPMS

Locate the TPMS Reset Button:
- In most Volvo XC60 models, the reset button is found underneath the steering wheel.
Turn on the Ignition:
- Without starting the engine, turn the ignition key to the "ON" position or press the start button without pressing the brake pedal.
Press the TPMS Reset Button:
- Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
Turn Off the Ignition:
- Turn the ignition off and wait for a few minutes.
Start the Engine:
- Start the engine and check if the tire pressure warning light is off.