FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the typical error codes associated with the Volvo XC60 first generation? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What are the typical error codes associated with the Volvo XC60 first generation?

What are the typical error codes associated with the Volvo XC60 first generation?

Volvo XC60 First Generation (2008-2017)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
632 words

Problem Statement

Discover common error codes, symptoms, and diagnostic steps for the Volvo XC60 first generation (2008-2017) to ensure optimal performance and reliability.

Affected Component
Various electronic systems

Symptoms

  • •Increased engine noise
  • •Poor acceleration
  • •Check Engine Light (CEL) illuminated
  • •Decreased fuel efficiency
  • •Rattling noise from the exhaust
  • •Fuel odor in the cabin or near the vehicle
  • •Poor engine performance
  • •Harsh or erratic shifting
  • •Transmission slipping
  • •ABS warning light activated
  • •Traction control issues
  • •Erratic speedometer readings
  • •Poor fuel economy
  • •Rough idling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Timing light
  • •Smoke machine (for EVAP leak testing)
  • •Basic hand tools (wrenches, sockets, screwdrivers)
  • •Torque wrench (for reassembly)

Additional Information

Affected Component
Various electronic systems
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Error Codes for the Volvo XC60 First Generation (2008-2017)

The first generation Volvo XC60 (Y20) can exhibit a variety of error codes due to its complex electronic systems. Below are some of the typical error codes associated with this model, along with their meanings and potential symptoms.

1. P0014 - Camshaft Position Timing Over-Advanced or System Performance (Bank 1)

Symptoms:

  • Increased engine noise
  • Poor acceleration
  • Check Engine Light (CEL) illuminated

Diagnostic Steps:

  • Use an OBD-II scanner to retrieve the error code.
  • Check the camshaft timing using a timing light.
  • Inspect the VVT (Variable Valve Timing) solenoid for proper operation.
2. P0420 - Catalyst System Efficiency Below Threshold (Bank 1)

Symptoms:

  • Decreased fuel efficiency
  • Rattling noise from the exhaust
  • Check Engine Light (CEL)

Diagnostic Steps:

  • Inspect the catalytic converter for physical damage or blockage.
  • Check O2 sensors (pre and post-catalytic converter) for proper operation.
  • Perform a visual inspection of exhaust leaks.
3. P0455 - Evaporative Emission Control System Leak Detected (Gross Leak)

Symptoms:

  • Check Engine Light (CEL)
  • Fuel odor in the cabin or near the vehicle
  • Poor engine performance

Diagnostic Steps:

  • Visually inspect the EVAP hoses and connections for damage.
  • Use a smoke machine to test for leaks in the EVAP system.
  • Check the gas cap for proper sealing and function.
4. P0720 - Output Speed Sensor Circuit Malfunction

Symptoms:

  • Harsh or erratic shifting
  • Transmission slipping
  • Check Engine Light (CEL)

Diagnostic Steps:

  • Use an OBD-II scanner to confirm the error code.
  • Inspect the wiring and connector for the output speed sensor.
  • Test the output speed sensor with a multimeter.
5. C0031 - Left Front Wheel Speed Sensor Fault

Symptoms:

  • ABS warning light activated
  • Traction control issues
  • Erratic speedometer readings

Diagnostic Steps:

  • Inspect the left front wheel speed sensor for damage.
  • Check the wiring and connections for continuity.
  • Use a scan tool to monitor wheel speed data in real-time.
6. P2299 - EVAP Purge Flow During Non-Purge Conditions

Symptoms:

  • Check Engine Light (CEL)
  • Poor fuel economy
  • Rough idling

Diagnostic Steps:

  • Inspect the EVAP purge valve for proper function.
  • Check the vacuum lines for leaks or blockages.
  • Verify the operation of the fuel filler cap.
Tools Required
  • OBD-II Scanner
  • Multimeter
  • Timing light
  • Smoke machine (for EVAP leak testing)
  • Basic hand tools (wrenches, sockets, screwdrivers)
  • Torque wrench (for reassembly)
Repair Instructions

General Steps for Troubleshooting Error Codes:

  1. Gather Tools and Equipment

    • Collect the necessary tools and equipment listed above.

  2. Read Error Codes

    • Connect the OBD-II scanner to the vehicle's diagnostic port.
    • Retrieve all stored error codes and record them for reference.

  3. Visual Inspection

    • Perform a thorough visual inspection of the affected components (wiring, connectors, sensors).
    • Look for signs of wear, damage, or corrosion.

  4. Perform Diagnostic Tests

    • Follow the specific diagnostic steps outlined for each error code.
    • Use a multimeter to check electrical components and sensors as needed.

  5. Perform Repairs

    • Replace any faulty components (sensors, valves, wiring) as indicated by diagnostics.
    • Ensure all connections are secure and free of corrosion.

  6. Clear Error Codes

    • After completing repairs, clear the error codes using the OBD-II scanner.
    • Take the vehicle for a test drive to ensure the repairs resolved the issue.

  7. Final Inspection

    • After the test drive, recheck for any new or recurring error codes.
    • Confirm that the Check Engine Light remains off.

By following these steps, you can effectively diagnose and repair common issues associated with the Volvo XC60 first generation, ensuring optimal performance and reliability.