FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I reset the service light on my 2012 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I reset the service light on my 2012 Volvo XC60?

How do I reset the service light on my 2012 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
442 words

Problem Statement

Learn how to reset the service light on your 2012 Volvo XC60 with these easy steps. Ensure maintenance is performed to avoid issues.

Affected Component
service light
Estimated Time
5 minutes

Symptoms

  • •service light illuminated
  • •maintenance due

Diagnostic Steps

  1. 1
  2. 2

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ignition Key or Key Fob
  • •OBD-II Scanner

Additional Information

Affected Component
service light
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Resetting the Service Light on a 2012 Volvo XC60
Tools Required
  • Ignition Key or Key Fob
  • OBD-II Scanner (if additional diagnostics are needed, but not required for the reset)
Reset Instructions

Follow these steps to reset the service light:

Step 1: Turn on the Ignition

  1. Insert the key into the ignition or have the key fob inside the vehicle.
  2. Turn the ignition switch to the “Position II” (the position where all dash lights illuminate but the engine is not started).

Step 2: Access the Trip Computer

  1. Locate the trip computer controls on the left side of the steering wheel.
  2. Use the scroll button (often referred to as the “OK” button) to navigate through the options on the display until you reach the "Trip" or "Settings" menu.

Step 3: Navigate to Service Reset

  1. Look for an option that indicates “Service” or “Reset Service”. This may vary depending on your specific model and software version.
  2. Once the service menu is highlighted, press and hold the “OK” button until a confirmation message appears.

Step 4: Confirm the Reset

  1. When prompted, confirm the reset by pressing the “OK” button again.
  2. The service light should turn off, indicating that the reset was successful.

Step 5: Verify the Reset

  1. Turn the ignition switch to the “Off” position.
  2. Start the vehicle to ensure the service light is no longer illuminated.
Additional Notes
  • If the service light remains on after following these steps, ensure that all maintenance has been completed, and consider using an OBD-II scanner to check for any fault codes.
  • If the reset cannot be performed through the vehicle’s interface or if the service light returns shortly after resetting, it may indicate a deeper issue requiring further diagnostics.
Conclusion

Resetting the service light on your 2012 Volvo XC60 is a straightforward process that can be completed in just a few minutes. Always ensure that the necessary maintenance has been performed to avoid potential issues down the line. If you encounter any difficulties, consulting the vehicle’s owner’s manual or contacting a professional technician may provide additional guidance.