How do I reset the service light in a 2014 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes

easy

Difficulty

low

Severity

3 min read

457 words

Problem Statement

Follow this step-by-step guide to reset the service light in your 2014 Volvo XC60 after performing the required maintenance.

Affected Component

service light

Symptoms

•Service light illuminated on the dashboard.
•Maintenance reminder message on the display.

Diagnostic Steps

1
Confirm Service Completion: Ensure that all required services (oil change, filter replacements, etc.) have been performed.
2
Check for Additional Warning Lights: Make sure there are no other warning lights that may indicate a different issue.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle's key fob or remote

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Resetting the Service Light in a 2014 Volvo XC60

If you're looking to reset the service light on your 2014 Volvo XC60, this guide will provide you with a step-by-step process. The service light typically indicates that the vehicle is due for maintenance, and it’s important to reset it only after the required service has been performed.

Tools Required

No specialized tools are required for this reset. However, having the vehicle's key fob or remote will be necessary.

Resetting the Service Light

Follow these detailed steps to reset the service indicator:

Step 1: Prepare the Vehicle

Ensure the vehicle is in a stationary position.
Close all doors and make sure the engine is off.

Step 2: Access the Ignition

Insert the key fob into the ignition slot or have the remote available for keyless start.

Step 3: Turn on the Ignition

Turn the ignition key to the "ON" position without starting the engine. If you're using a keyless start, press the "Start" button once without pressing the brake pedal.

Step 4: Navigate to the Trip Computer

On the dashboard, locate the "Trip" button (usually located on the left-hand side of the steering wheel).
Press the "Trip" button until you see the trip display on the dashboard.

Step 5: Reset the Service Light

While the trip display is active, press and hold the "Trip" button.
You will see the "Service" message appear.
Continue holding the "Trip" button until the message changes to "Reset" or "Service Reset" (usually takes around 10 seconds).
Release the button when you see a confirmation message indicating the service light has been reset.

Step 6: Verify the Reset

Turn the ignition off and then back on to ensure that the service light is no longer illuminated on the dashboard.

Step 7: Final Check

Start the engine and check the dashboard for any warnings. The service light should remain off if the reset was successful.

Conclusion

The service light in your 2014 Volvo XC60 should now be successfully reset. If the light reappears shortly after, it could indicate that there are other issues that need to be addressed, and a diagnostic scan may be necessary to identify any underlying problems. Always consult your vehicle’s manual for any specific instructions or variations related to your model.