FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the maintenance light on my Volvo XC60 First Generation (2008-2017) - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/how do I reset the maintenance light on my Volvo XC60 First Generation (2008-2017)

how do I reset the maintenance light on my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes
Less than 30 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
359 words

Problem Statement

Learn how to reset the maintenance light on your 2008-2017 Volvo XC60 with this easy step-by-step guide. No tools required.

Affected Component
Electrical
Estimated Time
Less than 30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged during the process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Potential confusion about scheduled maintenance intervals
  • •No effect on vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
Less than 30 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked in a safe location.
2. Resetting the Maintenance Light

  1. Turn Off the Ignition:

    • Ensure the vehicle is completely off before proceeding.

  2. Insert Key:

    • Insert the key into the ignition.

  3. Access Trip Odometer:

    • Press the "READ" button on the trip odometer until the total mileage is displayed.

  4. Turn Ignition On:

    • Turn the ignition key to the "ON" position (do not start the engine).

  5. Hold the READ Button:

    • Press and hold the "READ" button for approximately 10 seconds.
    • Watch for the maintenance light to start flashing, then release the button.

  6. Confirm Reset:

    • Observe the maintenance light; it should turn off, indicating that the reset was successful.