FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I troubleshoot the issue of my 2014 Volvo XC60's wipers not functioning? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How can I troubleshoot the issue of my 2014 Volvo XC60's wipers not functioning?

How can I troubleshoot the issue of my 2014 Volvo XC60's wipers not functioning?

Volvo XC60 First Generation (2008-2017)

Error Codes
2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
680 words

Problem Statement

Learn how to diagnose and repair wiper issues on your 2014 Volvo XC60 with step-by-step instructions and required tools.

Affected Component
wiper system
Estimated Time
2 hours

Symptoms

  • •Wipers do not move at all when activated.
  • •Wipers work intermittently or only in specific settings (e.g., low, high, or intermittent).
  • •Wipers operate but make unusual noises or do not clear the windshield effectively.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Ratchet
  • •Torque wrench
  • •Multimeter
  • •Circuit tester
  • •Jumper wires
  • •Screwdrivers
  • •Pliers

Additional Information

Affected Component
wiper system
Estimated Time
2 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting Wiper Issues on a 2014 Volvo XC60

If your 2014 Volvo XC60's wipers are not functioning, follow the steps below to diagnose and repair the issue.

Step 1: Visual Inspection
  1. Check Wiper Blades: Ensure that the wiper blades are not damaged or frozen to the windshield. Look for any tears or wear.
  2. Wiper Arm Position: Ensure that the wiper arms are not bent and are properly positioned when at rest.
  3. Windshield Condition: Ensure there is no debris or ice preventing the blades from moving.
Step 2: Check the Wiper Switch
  1. Turn on the Ignition: Make sure the ignition is in the ON position (but the engine does not need to be running).
  2. Activate Wiper Switch: Try different settings on the wiper switch (off, intermittent, low, high).
  3. Listen for Clicks: Listen for any sounds from the wiper relay or motor when activating the switch.
Step 3: Check for Electrical Issues
  1. Tools Required: Multimeter, circuit tester.
  2. Inspect Fuses: Locate the fuse box (usually under the dashboard or in the engine bay).
    • Find Wiper Fuse: Refer to the owner’s manual for the specific fuse for the wipers.
    • Check Fuse Condition: Pull the fuse and inspect if it is blown. Replace if necessary.
  3. Test for Voltage:
    • Use a multimeter to check for voltage at the wiper motor connector while activating the wiper switch.
    • If voltage is present, the problem lies within the motor or linkage. If no voltage, the issue could be with the switch, wiring, or relay.
Step 4: Inspect the Wiper Motor
  1. Tools Required: Socket set, ratchet, torque wrench.
  2. Remove Wiper Arms:
    • Use a socket to remove the nut securing each wiper arm.
    • Gently pull off the wiper arms from the splines.
  3. Access Wiper Motor:
    • Remove any necessary panels from the cowl area to access the wiper motor.
    • Disconnect the electrical connector from the motor.
  4. Test Motor Functionality:
    • Apply direct power to the motor using jumper wires to see if it operates. If it doesn’t run, the motor is likely faulty and should be replaced.
Step 5: Inspect Wiper Linkage
  1. Check Linkage Condition:
    • With the wiper arms removed, manually check the wiper linkage for any signs of wear or disconnection.
    • Ensure that the linkage moves freely without obstruction.
  2. Repair or Replace Linkage: If the linkage is damaged, it may need to be repaired or replaced.
Repair Instructions
Replacing Wiper Motor
  1. Purchase the Correct Motor: Ensure you have the correct replacement part (OEM or equivalent).
  2. Install New Motor:
    • Connect the new motor’s electrical connector.
    • Reinstall the motor using the original bolts and torque them to spec.
  3. Reassemble Wiper Assembly:
    • Reattach the wiper linkage and ensure it is secured properly.
    • Reinstall the wiper arms, ensuring they are aligned correctly on the splines.
  4. Test Wipers:
    • Reconnect the battery (if disconnected).
    • Test the wipers through all settings to ensure functionality.
Replacing Wiper Fuse or Relay
  1. Replace the Blown Fuse: If the fuse was blown, simply replace it with the correct amperage.
  2. Replace Relay: If the relay is faulty, locate the relay in the fuse box and replace it.
Final Checks
  • Once repairs are complete, perform a final check by testing the wipers in all operational modes.
  • Clean the windshield thoroughly to ensure proper performance.
Tools Required
  • Socket set
  • Ratchet
  • Torque wrench
  • Multimeter
  • Circuit tester
  • Jumper wires
  • Screwdrivers
  • Pliers

By following these steps, you should be able to diagnose and fix the wiper issue on your 2014 Volvo XC60 effectively. If the problem persists after these repairs, consider consulting a professional technician for further diagnostics.