FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Tiguan makes a knocking noise when I accelerate what's wrong - Volkswagen Tiguan
Home/Cars/Volkswagen/Tiguan/Second Generation (2018-present)/my Volkswagen Tiguan makes a knocking noise when I accelerate what's wrong

my Volkswagen Tiguan makes a knocking noise when I accelerate what's wrong

Volkswagen Tiguan Second Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
480 words

Problem Statement

Learn how to diagnose and fix knocking noise during acceleration in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Suspension
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the hood.

Symptoms

  • •Knocking noise during acceleration
  • •Possible vibrations felt in the steering wheel
  • •Decreased acceleration performance
  • •Unusual engine sounds at idle
  • •Potential warning lights on the dashboard (e.g., check engine light)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fluid pump
  • •Jack and jack stands

Parts Required

  • •Engine mounts (if damaged)
  • •Transmission fluid (if needed)
  • •Suspension parts (if damaged)

Additional Information

Affected Component
Suspension
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the battery to ensure safety during repairs.
  • Lift the vehicle securely using jack stands.
2. Inspect and Replace Engine Mounts
  1. Inspect Engine Mounts
    • Remove any covers obstructing access to engine mounts.
    • Visually inspect mounts for cracks or deterioration.
  2. Replace Damaged Engine Mounts
    • Use a socket set to remove bolts securing the engine mount.
    • Replace with new engine mounts, ensuring to torque bolts to manufacturer specifications (typically around 40-60 ft-lbs).
    • Reinstall any covers removed during the inspection.
3. Check and Replace Transmission Fluid
  1. Check Fluid Level
    • Locate the transmission dipstick; pull it out and wipe it clean.
    • Reinsert the dipstick and check the fluid level.
  2. Replace Fluid if Necessary
    • If fluid is low or dirty, drain the transmission fluid using a fluid pump.
    • Refill with the appropriate transmission fluid (consult owner's manual for type and capacity).
4. Inspect Suspension Components
  1. Visual Inspection
    • Check control arms, struts, and bushings for wear or damage.
    • Look for any loose bolts or missing components.
  2. Replace Damaged Parts
    • Remove damaged suspension components using a socket set.
    • Install new components ensuring proper torque specifications are followed.