FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Tiguan is making a loud noise when I accelerate what's going on - Volkswagen Tiguan
Home/Cars/Volkswagen/Tiguan/Second Generation (2018-present)/my Volkswagen Tiguan is making a loud noise when I accelerate what's going on

my Volkswagen Tiguan is making a loud noise when I accelerate what's going on

Volkswagen Tiguan Second Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
502 words

Problem Statement

Learn how to diagnose and fix loud noise during acceleration in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Exhaust System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is securely supported before working underneath
  • •Allow the engine to cool before inspecting the exhaust system to avoid burns

Symptoms

  • •Loud noise originating from the engine bay or exhaust area when accelerating
  • •Possible vibrations felt through the steering wheel or floor
  • •Decreased acceleration performance
  • •Fluctuating RPMs during acceleration
  • •Check engine light may illuminate

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Socket set
  • •OBD-II scanner
  • •Flashlight

Parts Required

  • •Exhaust pipe sections (if damaged)
  • •Engine mounts (if worn)
  • •Air filter (if dirty)
  • •Drive belt (if worn)

Additional Information

Affected Component
Exhaust System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Park the vehicle on a level surface and engage the parking brake.
  • Gather tools and safety equipment.
  • Tools Required: Jack and jack stands, socket set, OBD-II scanner, flashlight.
2. Inspect and Repair Exhaust System
  • Sub-steps:
    1. Raise the vehicle using a jack and secure it with jack stands.
    2. Visually inspect the exhaust system from the manifold to the tailpipe.
    3. Tighten any loose bolts or brackets in the exhaust system.
    4. Replace damaged or rusted sections of the exhaust pipe.
    5. Check the exhaust hangers and replace if they are cracked or broken.
3. Check Engine Mounts
  • Sub-steps:
    1. Inspect engine mounts visually for any signs of cracking or wear.
    2. If any mounts are damaged, unbolt the old mount using a socket set.
    3. Replace with new mounts and torque to the manufacturer’s specifications.
4. Air Intake Inspection
  • Sub-steps:
    1. Disconnect the air intake hose from the throttle body.
    2. Inspect the air filter for dirt or blockages and replace as necessary.
    3. Ensure the intake hose is securely connected and free of cracks.
5. Drive Belt Inspection
  • Sub-steps:
    1. Inspect the drive belts for cracks, fraying, or looseness.
    2. If worn, loosen the tensioner and remove the old belt.
    3. Install a new belt, ensuring proper routing, and adjust tension according to specifications.