how to reset the oil change light on my Volkswagen Tiguan Second Generation (2018-present)

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

354 words

Problem Statement

Learn how to reset the oil change light on your Volkswagen Tiguan (2018-present) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Engine

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral) before starting the reset process.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed
•Engine oil warning light may also be on

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Check the dashboard for the oil change light status.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Check the dashboard for the oil change light status.

Solution

1. Preparation

Gather necessary tools: None required for the reset procedure.
Ensure the vehicle is in a safe and parked position.

2. Key and Ignition Positioning

Insert the ignition key or press the start button without pressing the brake pedal to access the "On" position.
Make sure the dashboard lights are illuminated but the engine is not running.

3. Resetting the Oil Change Light

Press the gas pedal three times quickly in succession.
Turn the ignition back to the "On" position.
Observe the dashboard; the oil change light should begin to flash and then turn off.

4. Final Confirmation

Turn the ignition off and then restart the engine to ensure the oil change light is reset successfully.
If the light remains on, repeat the procedure.