FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the oil light in my Volkswagen Tiguan First Generation (2007-2018)? - Volkswagen Tiguan
Home/Cars/Volkswagen/Tiguan/First Generation (2007-2018)/how do I reset the oil light in my Volkswagen Tiguan First Generation (2007-2018)?

how do I reset the oil light in my Volkswagen Tiguan First Generation (2007-2018)?

Volkswagen Tiguan First Generation (2007-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
389 words

Problem Statement

Learn how to reset the oil light on your Volkswagen Tiguan First Generation (2007-2018) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the ignition is off during the reset process to avoid any accidental movement.

Symptoms

  • •Oil light remains illuminated on the dashboard
  • •No other warning lights are present
  • •Recent oil change completed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required; basic access to the vehicle controls.

Parts Required

  • •None required for the reset process.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: OBD-II scanner (if needed), owner's manual for reference.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
2. Reset the Oil Light

  1. Access the Instrument Cluster:

    • Ensure the car is in "Park" and the ignition is off.

  2. Hold the Trip Reset Button:

    • Locate the trip reset button on the instrument cluster (usually found on the speedometer).
    • Press and hold the trip reset button.

  3. Turn the Ignition On:

    • With the trip reset button held down, turn the ignition key to the "On" position (do not start the engine).

  4. Wait for the Oil Light to Reset:

    • Continue holding the trip reset button until the oil light blinks and then turns off (this may take a few seconds).

  5. Release the Button:

    • Once the oil light is off, release the trip reset button and turn the ignition off.