how do I reset the tire pressure light on my Volkswagen Golf MK7 (2015-2019)?

Volkswagen Golf MK8.5 (2024-Present)

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

413 words

Problem Statement

Learn how to reset the tire pressure light on your 2015-2019 Volkswagen Golf MK7. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

1
Check the tire pressures of all four tires using a tire pressure gauge.
2
Inflate or deflate the tires to the recommended pressure as specified in the owner's manual or on the door jamb sticker.
3
Start the vehicle and check if the warning light remains illuminated.
4
If the light persists, access the TPMS reset function using the vehicle's onboard menu.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Check the tire pressures of all four tires using a tire pressure gauge.
2
Inflate or deflate the tires to the recommended pressure as specified in the owner's manual or on the door jamb sticker.
3
Start the vehicle and check if the warning light remains illuminated.
4
If the light persists, access the TPMS reset function using the vehicle's onboard menu.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, air compressor, and vehicle owner's manual.
Ensure all tires are at the correct pressure before proceeding with the reset.

2. Resetting the TPMS

Start the Vehicle
- Insert the key and turn the ignition to the "On" position without starting the engine.
Access the Vehicle Settings
- Use the infotainment system or the multifunction display on the dashboard.
- Navigate to Vehicle settings using the controls on the steering wheel or center console.
Select Tire Pressure Monitoring
- Choose the Tire Pressure Monitoring option from the menu.
Initiate the Reset
- Select the option to reset the TPMS. Confirm the selection when prompted.
- The system may indicate that the reset is complete or may provide a confirmation message.
Turn Off the Ignition
- Turn the ignition off and then on again to ensure the resetting process is finalized.