why does my Volkswagen Golf MK7.5 (2020-Present) remote start not function

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

516 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the remote start issue in your 2020 Volkswagen Golf MK7.5. Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Ensure the vehicle is turned off and in a safe location during repairs.

Symptoms

•Remote start button on the key fob does not activate the vehicle
•No response or feedback from the vehicle upon pressing the remote start button
•Dashboard lights do not illuminate when attempting to start remotely
•Check engine light illuminated on the dashboard
•Engine does not start when attempting to use the remote start feature

Diagnostic Steps

1
Check the key fob battery to ensure it has sufficient charge.
2
Scan the vehicle's OBD-II system for any error codes related to the remote start system.
3
Verify that the vehicle is in a suitable condition for remote start (e.g., doors closed, hood closed).
4
Inspect the vehicle's battery voltage to ensure it is at an adequate level for starting.
5
Check the status of the vehicle's alarm or immobilizer system to see if it is preventing remote start.
6
Review the vehicle's user manual for any specific requirements for remote start activation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Flathead screwdriver

Parts Required

•Key fob battery (CR2032 or equivalent)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Remote start button on the key fob does not activate the vehicle

•No response or feedback from the vehicle upon pressing the remote start button

•Dashboard lights do not illuminate when attempting to start remotely

•Check engine light illuminated on the dashboard

•Engine does not start when attempting to use the remote start feature

Diagnostic Steps

1
Check the key fob battery to ensure it has sufficient charge.
2
Scan the vehicle's OBD-II system for any error codes related to the remote start system.
3
Verify that the vehicle is in a suitable condition for remote start (e.g., doors closed, hood closed).
4
Inspect the vehicle's battery voltage to ensure it is at an adequate level for starting.
5
Check the status of the vehicle's alarm or immobilizer system to see if it is preventing remote start.
6
Review the vehicle's user manual for any specific requirements for remote start activation.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked in a safe location and is turned off.
Disconnect the battery to prevent any electrical shorts.

2. Key Fob Battery Replacement

Sub-steps:
1. Carefully open the key fob using a small flathead screwdriver.
2. Remove the old battery (usually a CR2032 or similar).
3. Insert the new battery, ensuring the polarity is correct.
4. Reassemble the key fob and test the remote start function.

3. Inspect Vehicle Battery

Sub-steps:
1. Use a multimeter to check the voltage of the vehicle battery; it should be above 12.4 volts.
2. If the voltage is low, charge or replace the vehicle battery.
3. Reconnect the battery and test the remote start feature again.

4. Check Alarm/Immobilizer System

Sub-steps:
1. Look for any active warnings or alerts on the dashboard.
2. If the alarm is triggered, deactivate it using the key fob.
3. Consult the user manual for instructions on resetting the immobilizer if necessary.

5. Reconnect Battery and Test

Sub-steps:
1. Reconnect the vehicle battery.
2. Ensure all connections are secure.
3. Attempt to use the remote start feature again.