FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK7.5 (2020-Present) rear brakes are squeaking what should I do - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7.5 (2020-Present)/my Volkswagen Golf MK7.5 (2020-Present) rear brakes are squeaking what should I do

my Volkswagen Golf MK7.5 (2020-Present) rear brakes are squeaking what should I do

Volkswagen Golf MK7.5 (2020-Present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
584 words

Problem Statement

Learn how to diagnose and fix squeaking brakes on your Volkswagen Golf MK7.5. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Brakes
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always ensure the vehicle is securely lifted and supported before working on it.
  • •Allow brake components to cool down if the vehicle has been driven recently.

Symptoms

  • •Squeaking noise when braking, especially at lower speeds
  • •Reduced braking performance
  • •Vibration in the brake pedal
  • •Brake warning light illuminated on the dashboard
  • •Dust accumulation on the rear wheels

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack
  • •Jack stands
  • •Lug wrench
  • •Socket set
  • •Torque wrench
  • •Brake caliper tool or C-clamp

Parts Required

  • •New rear brake pads
  • •Brake cleaner (if needed)

Additional Information

Affected Component
Brakes
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is on a flat surface, and engage the parking brake.
  • Loosen the lug nuts on the rear wheels slightly before raising the vehicle.
2. Lift Vehicle and Remove Wheel
  • Tools Required: Jack, jack stands, lug wrench
  • Raise the rear of the vehicle using a jack and secure it with jack stands.
  • Remove the rear wheel by fully loosening and taking off the lug nuts.
3. Inspect Brake Components
  • Visually inspect brake pads for thickness; they should be at least 3mm thick.
  • Check the brake rotors for grooves or discoloration, indicating overheating or wear.
  • Examine the calipers for signs of leakage or improper function.
4. Replace Brake Pads (if necessary)
  • Tools Required: Socket set, torque wrench
  • Remove the caliper bolts and carefully slide the caliper off the rotor.
  • Remove the old brake pads from the caliper bracket.
  • Install new brake pads into the caliper bracket, ensuring they are seated correctly.
  • Compress the caliper piston using a brake caliper tool or C-clamp to fit over the new pads.
5. Reassemble and Torque Components
  • Reinstall the brake caliper over the new pads and secure it with the caliper bolts.
  • Torque Specification: Tighten caliper bolts to the manufacturer’s specified torque (usually around 30-40 Nm).
  • Reinstall the wheel and hand-tighten the lug nuts.
6. Lower Vehicle and Final Checks
  • Lower the vehicle off the jack stands and remove the jack.
  • Tighten the lug nuts to the manufacturer’s specified torque (usually around 100-120 Nm).
  • Pump the brake pedal a few times to ensure proper brake pad seating and operation.