my Volkswagen Golf MK7.5 (2020-Present) is shaking when I brake what's wrong

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

476 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking vibration issues in your Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems related to the braking system.
•Allow the vehicle to cool down before starting any brake work to avoid burns.

Symptoms

•Steering wheel shakes during braking
•Vibration felt through the brake pedal
•Uneven braking performance
•Possible grinding noise when brakes are applied
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads for wear and uneven thickness.
2
Check brake rotors for warping or scoring.
3
Examine brake calipers for proper operation and sticking.
4
Confirm wheel alignment and balance.
5
Inspect suspension components for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack
•Jack stands
•Torque wrench
•Brake cleaner
•Rotor removal tool (if necessary)

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat surface and ensure the engine is off.
Engage the parking brake.

2. Remove Wheel

Tools Required: Socket set, jack, jack stands
1. Loosen the lug nuts on the front wheels.
2. Lift the vehicle using a jack and secure it with jack stands.
3. Fully remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Pads

Tools Required: Torque wrench, brake cleaner
1. Inspect the brake pads for uneven wear or thickness.
2. If worn, unbolt the caliper and remove it from the rotor.
3. Remove the old brake pads and clean the caliper bracket with brake cleaner.
4. Install new brake pads into the caliper bracket ensuring proper orientation.

4. Inspect and Replace Brake Rotors

Tools Required: Rotor removal tool (if necessary)
1. Inspect the brake rotor for warping or grooves.
2. If damaged, remove the rotor by unbolting it from the hub.
3. Install new rotors by aligning them with the hub and securing with bolts to manufacturer-recommended torque specifications.

5. Reassemble and Test

Tools Required: Torque wrench
1. Reattach the brake caliper over the new pads and rotors.
2. Reinstall the wheel and hand-tighten the lug nuts.
3. Lower the vehicle and torque the lug nuts to manufacturer specifications.
4. Perform a brake test to ensure proper function.