how to reset the service light in Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

389 words

Problem Statement

Learn how to reset the service light in your 2013-2020 Volkswagen Golf. Step-by-step guide to ensure your maintenance reminders are cleared.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in a safe environment when performing this reset.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder displayed on the instrument cluster
•Warning message indicating service required

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and all doors are closed.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the trip reset button or the button on the right side of the instrument cluster.
4
Press the button until the 'Reset' option appears on the display.
5
Confirm the reset by following on-screen prompts.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle owner's manual

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and all doors are closed.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the trip reset button or the button on the right side of the instrument cluster.
4
Press the button until the 'Reset' option appears on the display.
5
Confirm the reset by following on-screen prompts.

Solution

1. Preparation

Gather necessary tools, if required (e.g., vehicle owner's manual for reference).
Ensure all maintenance has been completed before resetting the service light.

2. Turn Ignition On

Insert the key into the ignition.
Turn the key to the "ON" position without starting the engine.

Use the trip reset button or the button on the right side of the instrument cluster.
Press and hold the button until the service menu appears on the display.

4. Reset the Service Light

Navigate to the "Reset" option using the button.
Press and hold the button again to confirm the reset.
Wait for the confirmation message indicating that the service light has been reset.

5. Turn Ignition Off

Turn the ignition back to the "OFF" position.
Remove the key from the ignition.