why does my Volkswagen Golf Eighth Generation (2020-present) make a loud noise when turning

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

614 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loud noise when turning in Volkswagen Golf Eighth Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Always use jack stands to secure the vehicle when lifted.

Symptoms

•Loud clunking or grinding noise when making turns
•Steering wheel feels stiff or unresponsive during turns
•Vibration or shaking felt in the steering wheel
•Uneven tire wear on the front tires
•Check engine or warning lights illuminated (if related to electronic steering)

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any loose or damaged suspension components such as control arms or bushings.
3
Examine the CV joints for signs of wear or damage.
4
Inspect the wheel bearings for play or noise when turned by hand.
5
Use an OBD-II scanner to check for any stored error codes related to the steering system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack
•Jack stands
•Bearing puller
•Funnel

Parts Required

•Power steering fluid
•Suspension bushings or control arms (if needed)
•CV joint assembly (if needed)
•Wheel bearing (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any loose or damaged suspension components such as control arms or bushings.
3
Examine the CV joints for signs of wear or damage.
4
Inspect the wheel bearings for play or noise when turned by hand.
5
Use an OBD-II scanner to check for any stored error codes related to the steering system.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Replace Power Steering Fluid

Tools Required: Funnel, clean rags.
Check the power steering fluid reservoir for low fluid levels.
If low, top up with manufacturer-recommended power steering fluid.
If fluid is dirty or contaminated, proceed to replace the fluid.
To replace, locate the power steering fluid return line and disconnect it to drain the old fluid.
Reconnect the line and refill the reservoir with new fluid.

3. Examine and Replace Suspension Components

Tools Required: Socket set, torque wrench, jack, jack stands.
Lift the vehicle securely and remove the front wheels.
Inspect the control arms and bushings for wear; replace if cracked or severely worn.
Tighten any loose bolts to manufacturer torque specifications.
Reinstall the wheels and lower the vehicle.

4. Inspect and Replace CV Joints

Tools Required: Socket set, pry bar.
Remove the axle nut and disconnect the CV joint from the wheel hub.
Examine the CV joint boot for tears and inspect the joint for wear.
If damaged, replace the CV joint with a new part.
Reassemble the joint and torque the axle nut to manufacturer specifications.

5. Inspect and Replace Wheel Bearings

Tools Required: Bearing puller, socket set.
Remove the wheel and brake assembly to access the wheel hub.
Check for play in the bearing by moving the hub side to side.
If bearing is faulty, use a bearing puller to remove it and install a new bearing.
Reassemble the brake components and wheel, ensuring all parts are torqued correctly.