how to change the wiper blades on my Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

436 words

Problem Statement

Step-by-step guide to replacing wiper blades on a 2013-2020 Volkswagen Golf. Learn symptoms, diagnostic steps, and installation instructions.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the windshield wipers are turned off and the ignition is off before starting the replacement.

Symptoms

•Streaking on the windshield during use
•Wiper blades skipping or chattering
•Cracks or tears visible on the rubber blades
•Noisy operation when wipers are in use
•Wiper blades not making full contact with the windshield

Diagnostic Steps

1
Inspect the wiper blades for visible damage such as tears or cracks.
2
Check the performance of the wipers during operation for streaking or skipping.
3
Examine the wiper arm mechanism for any signs of wear or damage.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None (optional: a clean cloth)

Parts Required

•New wiper blades (specific length for Volkswagen Golf, typically 24 inches for the driver side and 19 inches for the passenger side)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None (optional: a clean cloth)
Park the vehicle in a safe, flat area with the engine off.
Ensure the windshield is clean for better visibility during the replacement process.

2. Lift the Wiper Arms

Gently lift the wiper arms away from the windshield until they are in a vertical position.
Ensure they are securely held in place to avoid snapping back.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab and slide the wiper blade off the arm.
Repeat for the other wiper blade.

4. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the blade onto the arm until you hear a click, indicating it is securely attached.
Ensure the blade is positioned correctly for optimal contact with the windshield.

5. Lower Wiper Arms

Carefully lower the wiper arms back onto the windshield.
Ensure that they rest flat against the glass without any obstruction.