how to reset the maintenance light on my Toyota RAV4 XA50 (2019-2024)

Toyota RAV4 XA50 (2019-2024)

Less than 30 minutes

Time

easy

Difficulty

low

Severity

2 min read

370 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota RAV4 XA50. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

Less than 30 minutes

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode while performing this reset

•Maintenance light illuminated on the dashboard
•Possible warning message displayed on the multi-information display
•No change in vehicle performance; issue is solely related to the maintenance reminder

1
Verify that all required maintenance tasks have been completed (oil change, tire rotation, etc.)
2
Ensure the vehicle is in the 'ON' position without starting the engine
3
Locate the odometer reset button on the instrument panel
4
Check the owner's manual for specific resetting instructions for the maintenance light

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

•Ensure the vehicle is parked on a level surface and in the "ON" position (do not start the engine).

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Verify that all required maintenance tasks have been completed (oil change, tire rotation, etc.)
2
Ensure the vehicle is in the 'ON' position without starting the engine
3
Locate the odometer reset button on the instrument panel
4
Check the owner's manual for specific resetting instructions for the maintenance light

Solution

1. Preparation

Tools Required: None
Ensure the vehicle is parked on a level surface and in the "ON" position (do not start the engine).

2. Resetting the Maintenance Light

Locate the Odometer Reset Button:
- Find the odometer reset button, usually located on the instrument panel near the speedometer.
Turn the Ignition On:
- Turn the ignition switch to the "ON" position without starting the engine.
Press and Hold the Odometer Reset Button:
- Press and hold the odometer reset button until the odometer display shows "000000" or "Maintenance Reset" appears on the screen.
Release the Button:
- Release the odometer reset button once the maintenance light blinks and then turns off.
Turn Off the Ignition:
- Turn the ignition switch off and then back on to verify that the maintenance light is no longer illuminated.