how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)?

Toyota RAV4 XA40 (2013-2018)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

397 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 XA40. Step-by-step guide to clear the maintenance reminder after service.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and stationary before performing the reset procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•Vehicle owner has performed maintenance (oil change, filter replacement, etc.)
•Owner wants to clear the maintenance reminder for aesthetic or functional reasons

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed on the instrument cluster.
3
Turn the ignition switch to the 'OFF' position.
4
While holding down the trip meter reset button, turn the ignition switch back to the 'ON' position.
5
Continue to hold the trip meter reset button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed on the instrument cluster.
3
Turn the ignition switch to the 'OFF' position.
4
While holding down the trip meter reset button, turn the ignition switch back to the 'ON' position.
5
Continue to hold the trip meter reset button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the ignition is turned off.
Have the vehicle’s key fob ready.

2. Accessing the Ignition

Insert the key into the ignition switch.

3. Resetting the Maintenance Light

Turn the ignition switch to the "ON" position (do not start the engine).
Check that the odometer reading is displayed.
Turn the ignition switch to the "OFF" position.
Press and hold the trip meter reset button located on the dashboard.
While holding the button, turn the ignition switch back to the "ON" position.
Keep holding the trip meter reset button until the maintenance light blinks and then turns off.

4. Finalizing

Release the trip meter reset button.
Turn the ignition switch back to the "OFF" position, and then start the engine to confirm the maintenance light is off.