how to reset the maintenance light on Toyota RAV4 Fifth Generation (2019-present)

Toyota RAV4 Fifth Generation (2019-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

395 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 Fifth Generation (2019-present) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' to prevent accidental movement during the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the multi-information display
•No other performance issues present

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the multi-information display.
3
Select 'Maintenance' from the settings options.
4
Choose 'Oil Change' or the appropriate maintenance item to reset.
5
Confirm the reset by following the on-screen prompts.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or ignition key
•Steering wheel controls

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the multi-information display.
3
Select 'Maintenance' from the settings options.
4
Choose 'Oil Change' or the appropriate maintenance item to reset.
5
Confirm the reset by following the on-screen prompts.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Keep the vehicle in "Park" mode.
Have the vehicle's key fob ready.

2. Accessing the Ignition

Insert the key fob into the ignition slot or have the vehicle's key fob within range if it's a push-to-start model.
Press the brake pedal and push the start button to set the ignition to "ON" position (do not start the engine).

3. Navigating the Multi-Information Display

Use the controls on the steering wheel to scroll through the menu on the display.
Find the "Settings" option and select it by pressing the "OK" button.

4. Resetting the Maintenance Light

Scroll to the “Maintenance” option and select it.
Choose the specific maintenance item you wish to reset (e.g., "Oil Change").
Select the reset option and confirm the reset when prompted.

5. Finalizing the Reset

Turn the ignition off completely.
Start the engine to ensure the maintenance light is no longer illuminated.