how to reset the maintenance light on my Toyota RAV4 Fifth Generation (2019-present)

Toyota RAV4 Fifth Generation (2019-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

325 words

Problem Statement

Learn how to reset the maintenance light on your 2019-present Toyota RAV4. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible accompanying message on the multi-information display
•No impact on vehicle performance noted

Diagnostic Steps

1
Verify the maintenance light is indeed for scheduled service and not indicating a fault.
2
Check the vehicle's maintenance schedule to confirm if service is due.
3
Ensure that the engine is off before proceeding with the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this reset procedure.
Ensure the vehicle is in a safe location with the engine off.

2. Turn the Ignition On

Insert the key into the ignition or press the start button without pressing the brake pedal.
Turn the ignition to the "ON" position (not starting the engine).

3. Access the Multi-Information Display

Using the steering wheel controls, navigate to the "Settings" menu on the multi-information display.
Select the "Maintenance" option.

4. Reset Maintenance Light

In the "Maintenance" menu, locate the "Oil Maintenance" or "Reset Maintenance" option, depending on the display.
Select the reset option and confirm when prompted.

5. Turn Off Ignition

Turn off the ignition completely after confirming the reset.
Wait a few moments before starting the vehicle.