how to reset the oil maintenance light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

364 words

Problem Statement

Learn how to reset the oil maintenance light on your 2020-Present Toyota Highlander XU70. Step-by-step guide to ensure proper maintenance tracking.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (or 'Neutral' for manual transmission) before performing the reset.

Symptoms

•Oil maintenance light remains illuminated on the dashboard
•Vehicle prompts for oil change on the display
•Warning message regarding low oil life or maintenance overdue

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Navigate to the 'Settings' menu on the Multi-Information Display (MID).
3
Select 'Maintenance' from the Settings menu.
4
Choose 'Oil Life' or 'Oil Maintenance' option.
5
Confirm the reset option when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle in the "ON" position with the engine off.

2. Access the Multi-Information Display (MID)

Turn the ignition switch to the "ON" position (do not start the engine).
Use the steering wheel controls to navigate through the MID.

Locate the "Settings" option in the MID.
Press the "Enter" button to access the settings.

4. Select Oil Maintenance

Scroll down to find "Maintenance."
Select "Oil Life" or "Oil Maintenance" using the steering wheel controls.

5. Reset the Oil Maintenance Light

Choose the "Reset" option when prompted.
Confirm the reset to change the oil life back to 100%.
Exit the menu once the reset is confirmed.