how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

327 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the ignition is off while performing the reset to avoid accidental movement.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle operates normally otherwise

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Insert the key or press the Start button without pressing the brake pedal to turn on the accessory mode.
3
Locate the trip meter reset button on the instrument panel.
4
Verify that the current odometer reading is displayed.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary materials: vehicle key or key fob.
Ensure the vehicle is parked on a level surface.

2. Turn on Ignition

Insert the key into the ignition or press the Start button to enter accessory mode without starting the engine.
Wait for the dashboard lights to illuminate.

3. Reset Maintenance Light

Press and hold the trip meter reset button until the odometer display changes to “000000”.
Continue holding the button for about 5 seconds until the maintenance light begins to flash and then turns off.
Release the trip meter reset button.

4. Verify Reset

Turn off the ignition.
Start the vehicle to confirm that the maintenance light is no longer illuminated.