how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

369 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70 with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in the 'Park' position to prevent movement during the process.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification on the multi-information display indicating service is due
•Engine oil change reminder activated

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Navigate to the multi-information display using the controls on the steering wheel.
3
Select the 'Settings' menu on the display.
4
Scroll to 'Vehicle Settings' and select it.
5
Choose 'Maintenance Reset' from the options presented.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this procedure.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Navigate to the multi-information display using the controls on the steering wheel.
3
Select the 'Settings' menu on the display.
4
Scroll to 'Vehicle Settings' and select it.
5
Choose 'Maintenance Reset' from the options presented.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Ensure the ignition is in the "OFF" position before starting the reset process.

2. Resetting the Maintenance Light

Turn on the Ignition:
- Turn the ignition switch to the "ON" position without starting the engine. (Do not press the brake pedal.)
Access the Multi-Information Display:
- Use the controls on the steering wheel to navigate to the "Settings" option on the multi-information display.
Select Vehicle Settings:
- Scroll down to "Vehicle Settings" using the down arrow on the steering wheel controls and press "OK" or "Enter."
Perform the Maintenance Reset:
- Find and select "Maintenance Reset" from the list. Confirm the reset when prompted.
Check the Maintenance Light:
- After resetting, turn the ignition switch to the "OFF" position, then back to "ON" to ensure the maintenance light has turned off.